Charge the LINK reader using the USB cable provided. It may take up to 3 hours to reach a full charge the first time. You'll know it's fully charged when the red charging indicator light goes off. The app will also display battery life.
Next, press the power button to turn it on and follow the remaining steps.
To turn the reader off, press the power button again.
NOTE: Please be sure to charge LINK before your first round and re-charge every time you finish playing. If you are storing a reader for an extended period of time (e.g. off-season), please fully charge before putting to storage and re-charge every 3 months if storing longer than that.
Attach one tag to each club in your bag, including your putter. Use a twisting motion to gently insert the post into the club grip. Be sure not to over-tighten.
Ensure Bluetooth is turned on in your phone settings. Open the Golf Pad app on your phone, select settings, then Golf Pad LINK / TAGS.
- Enable LINK, select Use LINK reader, then tap SET UP
- Follow the on-screen instructions. Flashing blue and green lights indicate the reader is searching for a device to pair with. Once paired, the blue and green lights will blink slowly. When the green light blinks quickly, this indicates the reader is searching for GPS location, a slow blink indicates location has been detected.
- Next, scan each tag with the wireless reader to assign your clubs.
If you have trouble with this step, click here for additional details on pairing LINK.
Getting Started Videos on YouTube
LINK support, FAQ and other information is available in our Knowledge Base. If you have feedback or questions not covered in the Knowledge Base, please let us know.
Please note, the minimum requirements for the app are 14.2 for Android and 11.3 for iPhone. Always get the latest version operating system version for best experience.